3
Negative battery cable disconnection
1. Set the selector lever to P range.
(AT vehicles only)
2. Disconnect the negative battery cable and wrap tape around it
to insulate.
CAR-NAVIGATION UNIT INSTALLATION
Pocket Assy Removal
1. Grasp the pocket assy from the back side of the lower panel
and press it out to the vehicle rear.
2. Remove the harness clips.
3. Disconnect the connectors.
3. VEHICLE PARTS REMOVAL
•
When the negative battery cable is connected during
operation, it may cause electric shock or other personal
injuries. Disconnect the negative battery cable before
removal/installation.
WARNING
•
When removing/installing the parts, park the vehicle on
level ground and apply the side brake securely. Be sure to
turn the ignition switch off, otherwise the vehicle can move,
causing personal injury or vehicle damage.
WARNING
4. INSTALLATION
•
Be careful not to apply excessive force to the wiring
harness when removing the connectors.
CAUTION
Pocket assy
Harness clip
Connectors
Negative battery cable
Pocket assy
Lower panel
Back side of
lower panel
assy
Clips
Clips
