background image

Hook Mounting

Power cable connection

Installation

L

N

G

Exposed

Wires

1. Turn off the Luminaire before installing.

2. Connect the luminaire to the power supply with 

    the IP68 connector.

3. Turn on Luminaire after installation completed.

- In case of abnormality, please immediately cut off the power source to avoid fire.

- Do not damage the product or replace the components to avoid electric shock, fire, and accident.

- The Power supply should not exceed the specified limit. (The recommended voltage: 220-240V,frequency: 50/60HZ).

- Long operation and exceeding this voltage range can cause accidents or damage from overheating.
- Do not use or store in corrosive environment with hazardous material e.g. Sulphur, Chlorine, Phthalates, etc.

- Please cut off the Power supply during maintenance, to avoid electric shock.
- Do not place high-temperature items such as electric heating ovens or stoves under this product to avoid fire.
- Do not stare at the operating light source.
- LED light source is different from the light source in general and can not be replaced by the user.
- Do not try to change this light source to avoid a fire.
- LED light sources have color aberrations. Photochromic (light color) and the power of light emitting various products vary from 
   one another.
- This product may cause interference if it is operated near a television or video.
- The operation of electrical equipments using remote control such as air conditioners, may cause malfunctioning of this product.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. 

To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it 

responsibly to promote the sustainable reuse of material resources. To return your used device, please use the 

return and collection systems or contact the retailer where the product was purchased. They can take this product 

for environmental safe recycling.

CORRECT DISPOSAL OF THIS PRODUCT

Ring

Hook

Hook Dimension

Spring Wash

63.5

**M10*1.0

45

25

17

Cable:Min.3x0.75mm

           Max.3x2.5mm

           OD

:     

6.5mm-10.0mm

2

2

L

N

L

N

6

14

25

23

22

P1

Safety Chain

position 

Brown

Blue

Yellow-Green

Wrench:22mm

Wrench:23mm

Wrench:23mm

Cross screwdrive

14mm

6mm

Wrench:22mm

Reviews: