manualshive.com logo in svg

Mazda B4000, Owner'S Manual

The Mazda B4000 Owner's Manual is a comprehensive guide to help you understand and operate your Mazda B4000 effortlessly. Available for free download at manualshive.com, this manual provides detailed instructions, maintenance schedules, and troubleshooting tips to ensure you optimize the performance of your Mazda B4000.

Share
Download
background image

Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.

Your vehicle is equipped with a remote entry system which allows you to:

•

unlock the vehicle doors without
a key.

•

lock all the vehicle doors without
a key.

•

activate the personal alarm.

If there is any potential remote keyless entry problem with your vehicle,
ensure

ALL remote entry transmitters

are taken to the dealership, to

aid in troubleshooting.

Unlocking the doors

1. Press

and release to unlock the driver’s door.

Note:

The interior

lamps will illuminate.

2. Press

and release again within three seconds to unlock all the

doors.

Locking the doors

•

Press

and release to lock all the doors. The park lamps will flash

once to confirm lock; if any of the doors are not properly closed, the
lamps will not flash.

•

Pressing

a second time within two seconds will cause all doors to

lock, the parking lamps to flash, and the horn to sound one time in
order to confirm locking.

Locks and Security

56

Summary of Contents for B4000

































































































































































































































































Reviews:

No comments

Related manuals for B4000

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Vaisala MD30 Setup Manual preview
MD30
Brand: Vaisala Pages: 24
Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
BendPak Autostacker PL-6SR Installation And Operation Manual preview
Autostacker PL-6SR
Brand: BendPak Pages: 104
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Würth 071554055 User Instructions preview
071554055
Brand: Würth Pages: 36
Parrot Parrot MKi + ParrotCK3100 range LOGAN Installation Manual preview
Parrot MKi + ParrotCK3100 range LOGAN
Brand: Parrot Pages: 10
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
TATA Motors Sumo Victa EX Owner'S Manual & Service Book preview
Sumo Victa EX
Brand: TATA Motors Pages: 92
Kuda 079020 Installation Instruction preview
079020
Brand: Kuda Pages: 2
Kia 2014 rondo Features preview
2014 rondo
Brand: Kia Pages: 11
Saab 2008 9-7x Owner'S Manual preview
2008 9-7x
Brand: Saab Pages: 426
Simplicity 1694286 Installation Instructions Manual preview
1694286
Brand: Simplicity Pages: 10

Brands by name

Popular brands

Load more brands