1
Add 118 ml (4 oz.) of Additive Friction Modifier meeting Mazda
specifications for complete refill of Traction-Lok axles. If submerged in
water, the rear axle lubricant should be changed.
2
Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCON
t
and MERCON
t
V are not interchangeable. DO NOT
mix MERCON
t
and MERCON
t
V. Refer to your service maintenance
section to determine the correct service interval.
3
Do not mix different types or colors of engine coolant.
4
Brake fluid will drop slowly as the brakes wear and will rise when brake
components are replaced. Fluid levels below the MAX line that do not
trigger the brake warning light are within the normal operating range,
there is no need to add fluid. If the levels are outside the normal
operating range, the performance of your brake system could be
compromised, seek service from your local Mazda dealer immediately.
ENGINE SPECIFICATIONS
Engine
2.3L I4 engine 3.0L V6 engine
4.0L V6 engine
Cubic inches
138
182
245
Required fuel
87 octane
87 octane
87 octane
Firing order
1-3-4-2
1-4-2-5-3-6
1-4-2-5-3-6
Spark plug gap
1.04-1.19mm
(0.041-0.047
inch)
1.07-1.17mm
(0.042-0.046
inch)
1.3-1.4 mm
(0.052-0.056
inch)
Ignition system
EDIS
EDIS
EDIS
Compression
ratio
9.7:1
9.14:1
9.7:1
Maintenance and Specifications
244
Summary of Contents for B4000
