Mazda 6 2017, Owner'S Manual

Page: 21 / 578

2–9
Essential Safety Equipment
Seats
NOTE

Individual seat positions can be
programmed to the two available
programming buttons on the side of the
driver's seat, plus one seat position for
each registered key.

If the vehicle has been serviced and
the battery cables disconnected, the
programmed seat positions will have
been erased. Re-program the seat
positions.
Programming
1. Make sure the parking brake is on.
2. (Automatic transaxle)
Make sure the selector lever is in the P
position.
3. Start the engine.
4. Adjust the seat and the active driving
display to the desired driving position.
5. Press the SET button on the seat until a
beep sound is heard one time.
6. Perform one of the following settings
within 5 seconds of completing step 5
above:

Programming using a button on
the side of the seat
Press the button you want to program,
either button 1 or 2, until a beep
sound is heard one time.

Programming using the key
Press the key button until a beep
sound is heard one time.
NOTE
If a beep sound is heard three times, the
operation is canceled.
To move the driving position to a
programmed position
(Using a button on the side of the seat)
1. Make sure the parking brake is on.
2. (Automatic transaxle)
Make sure the selector lever is in the P
position.
3. Start the engine.
4. Press the programming button for the
driving position you want to call up
(button 1 or 2).
5. A beep sound is heard when the driving
position adjustment is completed.
NOTE

If the driving position movement is not
changed, only the beep sounds.

A seat position can be called up even
with the engine not running.

The driving position adjustment is
canceled in the following cases:

Any of the seat adjustment switches
is operated.

The SET button is pressed.

Programming button 1 or 2 is
pressed.

The key button or button is
operated.

The vehicle starts moving.

The active driving display is
adjusted.
Mazda6_8FH2-EA-16F_Edition1.indb 9 2016/05/10 19:22:35