Mazda 6 2017, Owner'S Manual

Page: 22 / 578

2–10
Essential Safety Equipment
Seats
(Using a programmed key)
1. Unlock the doors by pressing a request
switch or the key button.
2. After unlocking the doors, the seat
position adjustment begins within 40
seconds of opening the driver's door,
and a beep sounds when the operation
is finished.
3. Make sure the parking brake is on.
4.
(Automatic transaxle)
Make sure the selector lever is in the P
position.
5. Start the engine.
6. The active driving display adjustment
begins.
NOTE

If there is no driving position movement,
a beep is not heard.

The driving position adjustment is
canceled in the following cases:

Any of the seat adjustment switches
is operated.

The SET button is pressed.

Programming button 1 or 2 is
pressed.

The key button or button is
operated.

The vehicle starts moving.

The active driving display is
adjusted.
Erasing programmed driving positions
(Erasing the driving positions
programmed to the key)
1. Switch the ignition OFF.
2. Press the SET button on the side of the
seat until a beep sound is heard one
time.
3. After the beep sounds, press the key
button within 5 seconds until a beep
sound is heard one time.
NOTE
If a beep sound is heard three times, the
operation is canceled.
Mazda6_8FH2-EA-16F_Edition1.indb 10 2016/05/10 19:22:35