Mazda 3 2018 Owner'S Manual Download Page 402

Page: 402 / 624

▼

How to Use the Bluetooth

Audio

System

Switching to Bluetooth

audio mode

To listen to music or voice audio recorded
to a Bluetooth

audio device, switch to the

Bluetooth

audio mode to operate the

audio device using the audio system
control panel. Any Bluetooth

audio

device must be paired to the vehicle's
Bluetooth

unit before it can be used.

Refer to Bluetooth

Preparation (Type A)

on page 5-72.
1. Turn on the Bluetooth

audio device's

power.

2. Switch the ignition to ACC or ON.

Make sure that the “ ” symbol is
displayed in the audio display. The
symbol is not displayed if an un-paired
Bluetooth

audio device is being used

or the vehicle's Bluetooth

unit has a

malfunction.

NOTE

Some Bluetooth

audio devices need a

certain amount of time before the “ ”
symbol is displayed.

3. Press the media button (

) to

switch to the Bluetooth

audio mode

and start playback.

If the current device version is lower
than AVRCP Ver. 1.3:

“BT Audio” is

displayed.

If the current device is AVRCP Ver. 1.3:

The playback time is displayed.

NOTE



If the Bluetooth

audio device does not

begin playback, press the Play/Pause
button (4).



If a call is received on a hands-free
mobile phone during playback from the
Bluetooth

audio device, the playback is

stopped. Playback from the Bluetooth

audio device resumes after the call ends.

Playback

1. To listen to a Bluetooth

audio device

over the vehicle's speaker system,
switch the mode to Bluetooth

audio

mode. (Refer to “Switching to
Bluetooth

audio mode”)

2. To stop playback, press the Play/Pause

button (4).

3. Press the button again to resume

playback.

Selecting a file (track)

Selects the next file (track)

Short-press the track up button (

Selects the beginning of the current file
(track)

Short-press the track down button (

Fast-forward/Reverse (AVRCP Ver. 1.3)

Fast-forward

Press and hold the fast-forward button
(

Reverse

Press and hold the reverse down button
(

Interior Features

Bluetooth®

5-112

Mazda3_8GE4-EA-17F_Edition1

2017-4-7 11:59:21

Summary of Contents for 3 2018

















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3 2018

Reviews:

Related manuals for 3 2018

Brands by name

Popular brands

Mazda 3 2018, Owner'S Manual

Search results

Summary of Contents for 3 2018

Reviews:

Related manuals for 3 2018

Brands by name

Popular brands