
Black plate (108,1)
To close to the desired position, press the
tilt/slide switch in the forward direction.
Close
Open
q
Power Moonroof Re-set Procedure
If the battery is disconnected, the
moonroof will not operate. The moonroof
will not operate correctly until it is re-set.
Carry out the following procedure to re-
set the moonroof and resume operation:
1. Switch the ignition ON.
2. Press the tilt switch, to partially tilt
open the rear of the moonroof.
3. Repeat Step 2. The rear of the
moonroof tilts open to the fully open
position, then closes a little.
NOTE
If the re-set procedure is performed while the
moonroof is in the slide position (partially
open) it will close before the rear tilt opens.
q
Sunshade
The sunshade can be opened and closed
by hand.
The sunshade opens automatically when
the moonroof is opened, but must be
closed by hand.
Sunshade
CAUTION
Ø
The sunshade does not tilt. To
avoid damaging the sunshade, do
not push up on it.
Ø
Do not close the sunshade while
the moonroof is opening. Trying to
force the sunshade closed could
damage it.
3-34
Before Driving
Windows
CX-5_8DR3-EC-14A_Edition3 Page108
Monday, June 30 2014 3:37 PM
Form No.8DR3-EC-14A
Summary of Contents for 2015 CX-5
