Mazda 2015 CX-5, Owner'S Manual

Page: 269 / 533

Black plate (268,1)
q
Operating the Radio
Seek tuning buttons
Band selector buttons
Scan button
Auto memory button
Manual tuning/Audio control dial
Channel preset buttons
Radio ON
Press a band selector button ( ) to
turn the radio on.
Band selection
Successively pressing the band selector
button (
) switches the bands as
follows: FM1
→
FM2
→
AM.
The selected mode will be indicated. If
FM stereo is being received,
“
ST
”
will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
“
ST
”
indicator will go out.
Tuning
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be erased.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pressing the seek tuning button ( , )
will cause the tuner to seek a higher or
lower frequency automatically.
NOTE
If you continue to press and hold the seek
tuning button (
, ), the frequency will
continue changing without stopping.
Scan tuning
Press the scan button ( ) to
automatically sample strong stations.
Scanning stops at each station for about 5
seconds. To hold a station, press the scan
button (
) again during this interval.
Preset channel tuning
The 6 preset channels can be used to store
6 AM and 12 FM stations.
1. To set a channel first select AM, FM1,
or FM2. Tune to the desired station.
5-28
Interior Features
Audio System
CX-5_8DR3-EC-14A_Edition3 Page268
Monday, June 30 2014 3:38 PM
Form No.8DR3-EC-14A