Mazda 2013 CX-5, Workshop Manual

Page: 60 / 223

DTC C1031:68 [DYNAMIC STABILITY CONTROL (DSC)]
http://am.mazdaserviceinfo.com/emazda/dealersystem/service/esi/en_us/SM/2013/CX5/mv/books/mvw04/html/id0402b2907000.html[1/7/13 9:30:10 AM]
< Previous Next >
2013 - CX-5 - Brakes
DTC C1031:68 [DYNAMIC STABILITY CONTROL (DSC)]
DTC C1031:68 Tire pressure monitoring system (TPMS) system
DETECTION
CONDITION
Error is detected in ambient temperature sensor from PCM via
CAN communication.
FAIL-SAFE
FUNCTION
Tire pressure monitoring system warning light illuminates after
flashes.
Inhibits the TPMS control.
POSSIBLE CAUSE
Ambient temperature sensor malfunction
PCM malfunction
SYSTEM WIRING
DIAGRAM
—
Diagnostic procedure
STEP INSPECTION ACTION
1
VERIFY DTCs FOR PCM
Switch the ignition to off.
Verify DTCs for the PCM using the
M-MDS.
(See
ON-BOARD DIAGNOSTIC TEST
[SKYACTIV-G 2.0]
.)
Is the DTC displayed?
YesRepair the malfunctioning part according to the
applicable DTC troubleshooting.
(See
DTC TABLE [SKYACTIV-G 2.0]
.)
No Go to the next step.
2
INSPECT AMBIENT TEMPERATURE SENSOR
Inspect the AMBIENT
TEMPERATURE SENSOR.
(See
AMBIENT TEMPERATURE
SENSOR INSPECTION [MANUAL AIR
CONDITIONER]
.)
AMBIENT TEMPERATURE
YesGo to the next step.
No Replace the ambient temperature sensor, then
go to the next step.
(See
AMBIENT TEMPERATURE SENSOR
REMOVAL/INSTALLATION [MANUAL AIR
CONDITIONER]
.)