18
• To set a channel, first press the
source button. Then select
AM, FM1, FM2, SAT1, SAT2
or SAT3. Tune to the
desired station.
• Press the TUNE button.
• Press any channel preset
on-screen button for about two
seconds until a beep sound is
heard. The selected preset
channel number and station
frequency will be displayed and
are now held in memory.
• Repeat to store other stations.
To tune to one in memory,
select band, then press its
channel preset button.
The station frequency and
the channel number will
be displayed.
Auto-memory
Press and hold the AUTO-M
button
to store additional AM/FM stations
without disturbing the previously
set channels. Refer to your Owner’s
Manual for complete details.
Info
Press to display the trip computer in
place of the clock. The trip computer
can display:
• Current fuel economy
• Average fuel economy
• Approximate distance you can
travel on the available fuel in your
gas tank.
• Average vehicle speed.
1.
Place the ignition in the
ACC or ON position.
2.
Press
LOAD /
3.
Press the
LOAD
on-screen button lightly.
4.
Wait for the screen
to lower.
5.
Insert the CD after “IN”
is displayed on the
Information Display.
The CD will begin playing
after the screen closes.
To PLAY A CD
1.
Press the
MENU
button.
2.
Select the Set Clock tab.
3.
Choose a 24-hour display or
a 12-hour display.
4.
Use the
+
hour and
-
hour
tabs to enter the correct hour.
5.
Use the
+30
min (minutes) and
-30
min
to move minutes ahead or back by 30
minutes.
6.
Press the OK tab to exit.
7.
gPS automatically sets the clock,
however, it may be necessary to adjust
hours in different time zones or daylight
saving time.
SETTING YoUR CLoCK
162131_09a_CX-9_SSG_081208.indd 19
8/12/08 11:54:07 AM
