G E T T I N G S T A R T E D
Always check the Owner’s Manual for more operating information and safety features
Getting
Started
Getting
Started
Starting engine
Press start knob
(
8
); when KEY
indicator (green)
illuminates on
instrument
cluster; turn start knob (
8
) to
START position to start engine
Tip: Engine may not start if
trunk is open and advanced
key is placed in trunk
Auxiliary key operation
If advanced key cannot be used due
to a malfunction or dead battery,
use auxiliary key (
5
) to lock/unlock
doors, trunk and to start vehicle
To start vehicle: Remove start
knob cover (
8
) by pressing both
side release buttons (
9
) while
pulling; insert auxiliary key into
key cylinder and turn to start engine
Tip: Do not place advanced key
on or around dashboard, storage
Advanced
keyless entry/
start system*
Advanced key
must be carried
by driver to
operate properly
Refer to Owner’s Manual for
additional instructions
Tip: System may not operate
correctly if vehicle is near
equipment such as wireless
pay devices located at some
gas stations, if this occurs, use
auxiliary key to lock/unlock
and start vehicle
Advanced keyless
system customization
Your authorized Mazda Dealer can
customize your system if desired
with features such as auto-lock:
After exiting the vehicle after driving,
the car will automatically lock
compartments such as glove
box or in open trunk, engine may
not start or warnings may activate
Turning off engine
Turn start knob to ACC position
to turn engine off, push in and
turn start knob to LOCK position
Tip: Vehicle battery may be
discharged and vehicle will not
lock remotely if start knob is
left in ACC position
Always put vehicle in Park (
P
), set
parking brake and turn start knob to
LOCK position when exiting vehicle
System operation warnings
KEY indicator light flashes (green)
indicates advanced key transmitter
battery power is low
KEY indicator light illuminated
continuously (red) indicates system
malfunction, and auxiliary key
should be used, have vehicle
inspected at an Authorized Mazda
Dealer as soon as possible
Passenger’s door request switch:
Press (
6
) on passenger’s door;
both doors unlock simultaneously
Trunk request switch: Press (
7
)
located above license plate, only
trunk will open, doors do not
lock/unlock
Advanced key transmitter:
Press
button (
2
) for driver’s
door; press again within a 3
seconds to unlock passenger’s door
Press and hold
button (3)
for more than
1
second
to
open trunk
Activating panic alarm
Panic alarm: Press and hold
button (
4
) for more than 1 second;
horn sounds, hazard warning
lights flash; to stop, press any
remote button
Tip: When using advanced
keyless system, system will
beep as confirmation of
lock/unlock requests, system
will also beep if start knob is
left in ACC position, advanced
key has been left in vehicle or
if advanced key is removed from
vehicle while vehicle is running
For additional system operation
warnings, see Owner’s Manual
Replacing battery
See Owner’s Manual for
complete instructions
Cautions on use
To avoid damage to advanced
key, do not allow any severe
impacts or contact with liquids,
do not place heavy objects on
advanced key and do not leave
advanced key exposed to direct
sunlight or high temperatures
See Owner’s Manual for all
cautions and warnings
For additional information
on customizable features,
see Owner’s Manual
Locking doors
Driver’s/passenger’s door request
switch: Press (
6
) once on either
door to lock both doors
Advanced key transmitter:
Press button
(
1
); pressing again
within a few seconds causes doors
to relock and horn to beep
Unlocking doors/
opening trunk
Driver’s door request switch: Press
(
6
) to unlock driver’s door; press
again within 3 seconds to unlock
both doors
*Denotes optional equipment
1
2
4
5
3
L
O
C
K
AC
C
ON
S
TA
R
T
PUSH
9
8
9
6
7
