Mazda 2006 3 Owner'S Manual Download Page 295

Page: 295 / 372

Black plate (295,1)

Brake lights/Taillights (5 Door)

With LED bulb

Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible.
The rear combination component must
be replaced.

With Non-LED bulb

1. Remove the cover.

Left side

Right side

2. Turn the socket and bulb assembly

counterclockwise and remove it.

3. Disconnect the bulb from the socket.

4. Install the new bulb in the reverse order

of removal.

NOTE

To replace the bulb, contact an
Authorized Mazda Dealer.

Rear turn signal lights (5 Door)

1. Remove the cover.

Left side

Maintenance and Care

Owner Maintenance

8-47

Mazda3_8U55-EA-05G_Edition2 Page295
Thursday, June 23 2005 2:56 PM

Form No.8U55-EA-05G

Summary of Contents for 2006 3





















































































































































































































































































































































































Search results

Summary of Contents for 2006 3

Reviews:

Related manuals for 2006 3

Brands by name

Popular brands

Mazda 2006 3, Owner'S Manual

Search results

Summary of Contents for 2006 3

Reviews:

Related manuals for 2006 3

Brands by name

Popular brands