Mazda 2004 Miata MX-5 Owner'S Manual Download Page 59

Page: 59 / 281

3-20

Knowing Your Mazda

Doors and Locks

Form No. 8S15-EA-03G

5. Push the unlock buttons and fully

release the top latches.

6. Lift up on the front section of the top to

release it from the windshield header.

7. Fold back the front and carefully lower

it to the storage area, then put the
latches in the locked position.

▼

Covering the Convertible Top

1. Cover the convertible top with the top

covering, stored in the trunk.

2. Feed the straps on the bottom of the

covering through the lower links and
snap them into position.

3. Secure the top covering with the straps.

4. Affix the top covering fasteners.

Unlock button

Top latch

Windshield header

Top covering

Link

Strap

J07S_8S15-EA-03G_Edition2.book Page 20 Thursday, August 21, 2003 10:04 AM

Summary of Contents for 2004 Miata MX-5


























































































































































































































































































Search results

Summary of Contents for 2004 Miata MX-5

Reviews:

Related manuals for 2004 Miata MX-5

Brands by name

Popular brands

Mazda 2004 Miata MX-5, Owner'S Manual

Search results

Summary of Contents for 2004 Miata MX-5

Reviews:

Related manuals for 2004 Miata MX-5

Brands by name

Popular brands