Mazda 2 2015, Owner'S Manual

Page: 396 / 638

5–95
Interior Features
Bluetooth
®
NOTE
For the operation of the device, refer to
its instruction manual.
2. Press the pick-up button or talk button
with a short press.
3.
Say:
[Beep] “Setup”
4.
Prompt:
“Select one of the following:
Pairing options, confi rmation prompts,
language, password, select phone or
select music player.”
5.
Say:
[Beep] “Pairing options”
6. Prompt: “Select one of the following:
Pair, edit, delete, list, or set pin code.”
7. Say: [Beep] “Pair”
8. Prompt: “Start the pairing process on
your Bluetooth ®
device. Your pin code
is 0000 (XXXX). Input this on your
Bluetooth
®
device. See device manual
for instructions.”
9. Using the device, perform a search
for the Bluetooth
®
device (Peripheral
device).
NOTE
For the operation of the device, refer to
its instruction manual.
10. Select “Mazda” from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt: “Please say the name of the
device after the beep.”
13. Say: [Beep] “XXXX - - -” (Speak a
“device tag”, an arbitrary name for the
device.)
Example: “Stan's device.”
NOTE
Say a paired “device tag” within 10
seconds.
If more than two devices are to be
paired, they cannot be paired with the
same or similar “device tag”.
14.
Prompt:
“Adding XXXXXX - - - (Ex.
“Stan's device”) (Device tag). Is this
correct?”
15.
Say:
[Beep] “Yes”
16. Prompt: “Pairing complete”
After a device is registered, the system
automatically identifi es the device. By
activating Bluetooth
®
Hands-Free again,
or by activating Bluetooth ® Hands-Free
fi rst after switching the ignition from
OFF to ACC, the system reads out a voice
guidance, “XXXXXX - - - (Ex. “Stan's
device”) (Device tag) is connected”.
NOTE
When the pairing is completed, the
symbol is displayed.
Some Bluetooth
®
audio devices need
a certain amount of time before the
symbol is displayed.
Device registration can also be done
by operating the audio unit.
Depending on the device, the
registration status may be lost after a
certain period of time. If this occurs,
repeat the entire process from Step 1.
Mazda2̲8EC6-EE-14L̲Edition1.indb 95 2014/09/26 17:50:15