MECHANICAL
01–10–31
01–10
Caution
••••
It is possible that the identification color
may not be visible when reusing the oil
spring. In that case, assemble the
rounded end towards the rotor side and
the squared end upward.
••••
Be careful when assembling the oil seal
spring of the front and rear rotor since
each spring of the engine front side and
engine rear side are the same.
Note
•
Either one of the two rotation lock slots on
the oil seal can be used as a reference.
•
Assemble the rounded end within 0—15 mm
{0—0.59 in} away from the oil seal spring
rotation lock.
O-Ring Assembly Note
1. Apply petroleum jelly to a new O-ring.
2. Assemble the O-ring to the oil seal.
Note
•
Assemble the thicker O-ring to the inner oil
seal (small radius), and the thinner O-ring to
the outer oil seal (large radius).
ROTOR
ROTATION
DIRECTION
ROTOR
ROTATION
DIRECTION
ENGINE FRONT SIDE AND REAR SIDE
SQUARED END
ROUNDED END
CHU0110E024
ROTOR ROTATION DIRECTION
IDENTIFICATION COLOR
0—15 mm {0—0.59 in} ROTATION LOCK
CHU0110E025
BHJ0110E077
Summary of Contents for 13B-MSP
Page 71: ......
