Page 2 of 10
AS 090-M11384cmc106
0
Before Installation
A. Seats must be clean and completely dry prior to installation.
1
A. Remove head rests from 1st row seats. Locate 1st row
seat cover (A) for driver’s side and slip over driver’s seat.
Slide seat cover around arm rest. Locate holes for head
rest mounts and push seat cover fabric under head rest
mounts. Push web strap (B) between seat and plastic
molding on outside edge and pull taut.
B. Repeat on passenger’s side with corresponding seat
cover (C). There are no openings for arm rest on this
side.
A
C
B
Install 1st Row Seat Covers
2
A. Starting on driver’s side, locate pad on inside bottom edge of
seat cover bottom. Insert pad in area between seat and plastic
molding.
B. Locate clip (D) on outside bottom edge of seat cover bottom,
attach to edge of plastic molding.
C. Pull buckle inserts (E) through area between seat back and
seat bottom. Push two buckle inserts under seat and attach to
buckle receptacles (F) located at front bottom of seat cover.
Attach two remaining buckle inserts to buckle receptacles (G)
located at top of back seat cover.
D. Attach velcro hook and loop (H) on backside of seat cover.
E. Repeat steps on passenger’s side.
Insert Pads, Clips and Attach Buckles
D
E
F
G
H
3
4
A. Locate 1st Row driver’s side arm rest cover (L). Slide arm rest
cover over arm rest.
Install 1st Row Arm Rest
A. Locate driver’s side head rest and cover. With long side
of head rest cover toward the front of the head rest, slide
head rest cover (J) over the driver’s side head rest.
Attach velcro hook to velcro loop at underside of head
rest. Adjust cover as needed and return head rest to
its original position.
B. Locate passenger’s side head rest and cover (K).
Repeat installation on passenger’s side.
Install 1st Row Head Rests
L
K
J
