0000-8E-N31 Rev G
02/24/2016
5 of 8
A) Preassemble four M12 bolts (ITEM B) with a conical toothed washer (ITEM A).
Note: Be sure teeth on washer are facing away from the bolt head.
B) Pull down on vehicle bumper fascia to raise hitch up over exhaust.
C) Start by lifting the hitch over the driver-side exhaust tip.
D) Using two people, lift the hitch into position and insert four M12 bolts (ITEM B)
with washers (ITEM A) in through the side plates and out the center assembly.
Place one M12 flat washer (ITEM C) onto each bolt and fasten each using M12 nuts (ITEM D).
RAISE HITCH ASSEMBLY INTO POSITION
TOOLS: N/A
04
A
B
C
D
A) Torque all eight bolts to 86.2 ft. lbs. (107 N.m.)
TORQUE ALL HARDWARE
TOOLS: TORQUE WRENCH, 19MM SOCKET
05
19MM
C- Flat
washer
A- Conical
washer