Mazda RX-8
㧙
22
5. Affix a pad protector on the information display connector.
6. Wrap a pad protecor around the rear side of the harness
(G-X) 16-pin connector.
7. Connect the harness (G-X) 16-pin connector to the AUX,
Bluetooth H/F connector.
8. Affix the pad protector half to the dashboard member as
shown in the figure.
9. Insert the harness (G-X) GND wire between the
dashboard and the dashboard member and secure it
using the vehicle bolt.
10. Bundle the redundant part of harness (G-X) GND wire
and secure it to the harness (G-X) using a tie wrap
(small).
Vehicle front
Harness (G-X)
Pad protector
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
AUX, Bluetooth H/F
To Audio unit
Pad protector
Vehicle front
Harness (G-X)
㿉
㿈
Harness (G-X)
(16-pin connector)
To AUX connector
To Audio unit
Pad protector (1/2)
GND
Vehicle front
Tie wrap (small)
Harness (G-X)
㿉
㿈
Vehicle bolt
x
Make sure the ground eyelet contacts the steel
bracket.
CAUTION
