Mazda RX-8
㧙
20
11. Branch connect the +B wire to the audio 24-pin connector
(terminal B) using the electro tap.
12. Branch connect the ACC wire to the audio 24-pin
connector (terminal R) using the electro tap.
Audio 24 pin connector (Vehicle wire)
Kit
㩷
wire
Terminal B
+B
Terminal R
ACC
13. Wrap the electro taps and vehicle wiring harness together
using urethane.
14. Secure the harness (G-X) +B, ACC wires to the vehicle
wiring harness with tie wraps (small).
15. Hook the harness (G-X) to the A/C unit and secure it.
16. Secure the harness (G-X) to the side of the heater duct
using a pad protector as shown in the figure.
17. Secure the iPod connection cable to the dashboard
member using a tie wrap (small).
18. Bundle the iPod connection cable redundant part and
secure it using a tie wrap (large).
19. Wrap both looped ends of the excess iPod connection
cable with pad protectors.
20. Push the bundled harness into the back of the dashboard.
21.
Go to Step 16 on page 24.
Pad protector
Tie wrap (small)
Remove connector cover when connecting
iPod; fit connector cover when iPod is not used
Put iPod connection cable in glove box
(Cable 30 cm from instrument panel)
Tie redundant
part
iPod
integration module
Tie wrap (large)
Pad protectors
Vehicle front
Dashboard
Dashboard member
Heater duct
㿈
x
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
CAUTION
Urethane
Tie wraps
(small)
Terminal B: +B
Kit wire: +B
Terminal R: ACC
Kit wire: ACC
R
B
[Audio 24 pin connector ]
(View from wire side of connector)
Vehicle wiring harness
Electro-taps
Harness (G-X)
(+B, ACC wires)
Vehicle front
Hook
