Dolphin WAVE 100 Pool Cleaner
| Operating Instructions
2
Dolphin WAVE 100 Pool Cleaner
Operating Instructions
1. INTRODUCTION
Thank you for purchasing a Maytronics Robotic Pool Cleaner.
We are sure that your Maytronics Robotic Pool Cleaner will provide you with reliable, convenient and
cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing brush
enhance maximum pool hygiene.
The Robotic Pool Cleaners by Maytronics deliver advanced cleaning technology, long lasting
performance and easy maintenance.
2. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m / 2.6ft
Maximum depth: 5m / 16.4ft
3. WARNINGS AND CAUTIONS
3.1. Warnings
•
Use the originally supplied power supply only
•
Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
•
Keep the power supply out of standing water
•
Position the power supply at least 3m / 10ft away from the edge of the pool
•
Do not enter the pool while the pool cleaner is working
•
Unplug the power supply before servicing
3.2. Cautions
When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine
Max 4 ppm
pH
7.0 - 7.8
Temperature
6-34°C
/
43-93°F
NaCl
Maximum = 5000 ppm
CAUTION
8151637_Book.indb 2
29/12/2013 9:59 AM
