background image

Dolphin M400 / M500

 

|

 

User Instructions

1

Contents

1. INTRODUCTION ....................................................................... 2

2. SPECIFICATIONS....................................................................... 2

3. WARNINGS AND CAUTIONS ................................................... 2

  3.1 Warnings ............................................................................. 2

  3.2 Cautions .............................................................................. 2

4. POOL CLEANER PARTS ............................................................ 3

5. USING THE POOL CLEANER .................................................... 4

  5.1 Setup................................................................................... 4

  5.2  Putting the Pool Cleaner into the pool ............................... 5

  5.3  Removing the Pool Cleaner from the pool  ........................ 6

6. ROUTINE MAINTENANCE ........................................................ 7

  6.1  Cleaning the filter cartridges .............................................. 7

  6.2  Dismantling and cleaning the impeller ............................... 8

7. USING THE REMOTE CONTROL - M500 ONLY ....................... 9

8. OFF SEASON STORAGE ........................................................... 11

9. TROUBLESHOOTING ................................................................ 11

10. CADDY ASSEMBLY INSTRUCTIONS ....................................... 89

Dolphin M400 / M500

User Instruction

EN

Summary of Contents for Dolphin M400













Reviews: