COMM. 12 Robotic Pool Cleaner
|
User Manual
7
Manual direction control mode
1. Press the On/Off button once. This puts the remote
control in manual direction mode. Use the direction
control arrows (see right) to control the movement
of the robot around the pool.
2. Press the Forward or Backward arrows to
maneuver the Robotic Pool Cleaner forwards or
backwards at a faster speed.
3. Press the Forward or Backward arrows again to
maneuver the Robotic Pool Cleaner forwards or
backwards at the standard cleaning speed.
4. To stop the Robotic Pool Cleaner, press the arrow
showing the opposite direction to the direction in
which the robot is currently moving.
5. When the robot is idle (standing still) and you press
the Turn Left or Turn Right arrows, the robot will
turn left or right by moving one belt forwards and
the other backwards.
6. If you press the Turn Left or Turn Right arrows
while the robot is driving forwards or backwards,
the robot will turn left or right by turning one belt
and stopping the other belt.
8. CLEANING THE FILTER
Clean the Robotic Pool Cleaner filter after every cleaning cycle as follows:
1. Press the latch on the top of the Robotic Pool Cleaner to open the top cover.
2. Remove the filter chamber from the robot and separate its parts.
3. Wash the fine filter cartridge with water pressure from the inside out.
4. Return the fine filter to the filter chamber and put the chamber back in the Robotic Pool Cleaner.
5. The robot is ready for a new cleaning cycle.
Fine filter
Filter chamber
Cleaning cycle indicator
This determines the length of the cleaning cycle
Fast
4-hour cycle
Efficient (Default setting)
5-hour cycle
Extra
6-hour cycle
Note:
• After 2 minutes if no button is pressed, the remote control unit will shut down and the Robotic Pool
Cleaner will continue to work in the previous settings.
Exiting manual direction control mode and setting the automatic mode
1.
To exit the manual direction control mode, press
the Manual/Automatic select button once only.
2.
The digital screen will light up, and the cleaning
cycle indicator can be changed.
1. To select the chosen cleaning cycle use the Turn
Right or Turn Left arrows. When you reach the
required function press the
Set/OK button.
Press the Manual/Automatic select button and then choose the desired parameters according to the
following table:
Cover latch