background image

6

COOKTOP USE

The control knobs can be set to anywhere between HIGH and 
LOW. Push in and turn to setting.

Ceramic Glass

The surface cooking area will glow red when an element is on. It 
may cycle on and off to maintain the selected heat level.
Use cookware about the same size as the surface cooking area. 
Cookware should not extend more than ½" (1.3 cm) outside the 
area.
Cleaning off the cooktop before and after each use will help keep it 
free from stains and provide the most even heating.

Cooktop On Indicator Light

The Cooktop On indicator light is located on the console panel. 
When any control knob on the console panel is turned on, the 
Cooktop On indicator light will glow.

Hot Surface Indicator Light 

On ceramic glass models, the hot surface indicator light is located 
on the console panel.
The hot surface indicator light will glow as long as any surface 
cooking area is too hot to touch, even after the surface cooking 
area is turned off.

Triple Cooking Zones 

The Triple Cooking Zone offers flexibility depending on the size of 
the cookware. Single size can be used in the same way as a regular 
element. The dual and triple sizes combine single, dual and outer 
element and are recommended for larger size cookware, large 
quantities of food, and home canning.

Speed Heat™ Cooking Zone (on some models)

The Speed Heat™ Cooking Zone offers flexibility for 2 optional 
heating choices. The Speed Heat™ option can be used to boil 
liquids faster. The lower heat option can be used to prepare 
sauces, to brown or saute foods and to keep food at a low 
temperature. Use cookware appropriate in size for the Speed 
Heat™ Cooking Zone.

Warming Center Element

Use the Warming Center element to keep cooked foods warm. One 
hour is the recommended maximum time to maintain food quality.
Do not use it to heat cold foods.
The Warming Center element can be used alone or when any of the 
other surface cooking areas are being used.
The Warming Center element area will not glow red when cycling 
on. However, its indicator light will glow as long as the Warming 
Center element area is too hot to touch.

WARNING

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

REMEMBER: When range is in use or (on some models) 
during the Self-Cleaning cycle, the entire cooktop area may 
become hot.

A. Triple
B. Dual

C. Single

A. Speed Heat™ option
B. Lower heat option

C

B

A

A

B

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before 
or after cooking.

Doing so can result in food poisoning or sickness.

Summary of Contents for W10239459A

















Reviews: