background image

6

Not all cycles and settings are available on all models. Settings and options shown in 

bold

 are default settings for that cycle. 

SENSOR DRY CYCLE -

 Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.  

Gives the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.
Use the NORMAL dryness level to provide optimal energy savings.
Depending on model, temperature may be selected on cycle knob or be a separate control.

Items to dry:

Cycle:

Drying 

Temperature:

Dryness 

Level:

Default 

Time:

Available 

Options:

Cycle Details:

Sanitize

Eco Normal

Delicate

Extra 

Delicate

Normal

High

Medium

Low

Extra Low

Medium

More

 

Normal 

Less

More

 

Normal 

Less 

More

 

Normal 

Less 

More

 

Normal 

Less 

More

 

Normal 

Less 

60

38

30

25

40

Damp Dry Signal 

Wrinkle Prevent

Damp Dry Signal 

Wrinkle Prevent

Damp Dry Signal 

Wrinkle Prevent

Damp Dry Signal 

Wrinkle Prevent

Damp Dry Signal 

Wrinkle Prevent

This cycle is designed to 

eliminate 99.9% of 3 common 
infectious bacteria. This cycle 
should be run to completion 
to ensure sanitization. For best 
results, do not interrupt cycle.

Average size loads of medium weight items 

where improved energy is desired.

For gently drying delicate items.

For gently drying delicate items.

Medium to large loads of mixed fabrics  

and items.

Work clothes, casual 

wear, mixed cottons, 
sheets, corduroys

CYCLE GUIDE — SENSOR DRY CYCLES

CYCLE GUIDE — TIMED DRY CYCLES

Items to dry:

Cycle:

Drying 

Temperature:

Default 

Time:

Available 

Options:

Cycle Details:

Not all cycles and settings are available on all models. Settings and options shown in 

bold

 are default settings for that cycle.

TIMED DRY -

 Will run the dryer for the specified time on the control. 

Depending on model, temperature may be selected on cycle knob or be a separate control.

Timed Dry

Any

N/A

Temp Level 

Wrinkle Prevent 

Time Adjustment

Dries items to a damp level for items that do 

not require an entire drying cycle.

Select a drying temperature based on the 
fabrics in your load. If you are unsure of the 
temperature to select for a load, select the 
lower setting rather than the higher setting.

Small loads, lightweight 

items

Corduroys, work 

clothes

Lingerie, exercise wear, 

washable woolens

Any load

Small loads and 

sportswear  
(2 to 3 items)

Mixed loads

Rubber, plastic, heat 

sensitive fabrics

Rapid Dry 

Touch Up

Timed Dry

Any

Any

Air Dry

15

15

N/A

Temp Level 

Wrinkle Prevent 

Time Adjustment

Temp Level 

Wrinkle Prevent 

Time Adjustment

Temp Level 

Wrinkle Prevent 

Time Adjustment

For small loads of 2-3 items.

Use to remove wrinkles, including loads left 

in the dryer too long. Any timed dry cycle/
manual cycle does not sense the load.

Use a no heat (air dry) setting for foam,  
rubber, plastic, or heat-sensitive fabrics.

NOTE:

 If loads do not seem as dry as you would like, select More Dry the next time you dry a similar load. If loads seem drier than you 

like, select Less Dry the next time you dry a similar load.

Heavyweight items 

towels, jeans

Heavy 

Duty

High

More

 

Normal 

Less 

50

Damp Dry Signal 

Wrinkle Prevent

Use for drying large or heavy items. Evenly 

dries large or heavy loads.

Wrinkle 

Control

Low

More

 

Normal 

Less 

35

Damp Dry Signal 

Wrinkle Prevent

For normal light- to medium-weight fabrics. 

Drying time varies based on fabric type, 
load size, and dryness setting.

Sport shirts, casual 

business clothes, and 
permanent press blends

Any load

Wrinkle 

Prevent

No heat

N/A

After a cycle is complete, the load is 

periodically tumbled to avoid wrinkles  
until you are ready to remove it.

N/A

Added at the end of certain cycles to reduce wrinkling.

SPECIAL SETTINGS:

Towels, bedding, 

children’s clothing

Summary of Contents for W10096989B















Reviews: