Maytag pav2300agw Technical Bulletin Download Page 2

Page: 2 / 4

Page 2 of 4

TDL-0050B-B

9/30/2005

ITDL-0020A-B

4. Remove three screws attaching drain pump to base.

5. Lift top cover by inserting a plastic putty knife between top cover and front panel. Press the locking clip to

release the top cover. Repeat for both sides. Remove front panel by removing screws, one on each side of
the top edge of front panel.

6. Remove motor ground wire, motor shield, and motor wire harness connector.

Summary of Contents for pav2300agw

Page 1: ...PAV3300AWW PAV3360AWW PAV4960AWW PAV5000AWQ PAV5000AWW PAV5057AWW PAV5058AWW PAV5157AWW PAV5158AWW PAVT234AWW PAVT244AWW PAVT344AWW PAVT444AWW Issue Wash basket leans to one side generally to the righ...

Page 2: ...e 5 Lift top cover by inserting a plastic putty knife between top cover and front panel Press the locking clip to release the top cover Repeat for both sides Remove front panel by removing screws one...

Page 3: ...8 Be sure to lay down a protective pad before removing tub and transmission assembly from base Remove tub and transmission assembly turn over and lay on protective pad 9 Remove dust cap retaining rin...

Page 4: ...ing and base interaction 14 Clean the dome area of new base with alcohol then apply corn starch 15 Reinstall motor and pump to new base 16 Transfer transmission and outer tub onto new base Use spring...