Maytag Neptune MAH8700AW, Service

Page: 64 / 65

64 16026126 Rev. 0
©2005 Maytag Services
Information codes may be displayed to help you better understand what is occurr ing with the washer.
I
NFORM ATION
C
ODES
T
ROUBLESHOOTING
For any codes not listed above,call Maytag Customer Ser vice at 1-800-688-9900 USA or 1-800-688-2002 Canada.
Unbalanced load prevented the washer from
spinning.
Door is unlocked when washer is running.
Door is open when washer is running.
The washer failed to lock the door.
W ater temperatur e control problem.
(Heater Control problem)
The washer has tr ied to fill but has not r eached
the proper water level.
The door will not unlock.
Motor not running properly.
The washer is not dr aining.
The washer has tr ied to fill but was unsuccessful.
Problem with control.
Electric ser vice was lost when washer was
running.
Redistr ibute the load,press the Cy cl e S el ector
dial.
Pr ess
Powe r Of f pad then r estart the cycle. If the
code r eappear s, call for ser vice,see below.
Close the door tightly and restart the cycle.
If the code r eappear s, call for ser vice,see below.
Close the door tightly and restart the cycle.
If the code r eappear s, call for ser vice,see below.
Call for service,see below.
Call for ser vice,see below.
Make sur e the door is firmly closed.
Push the P ow er Of f pad to turn off the washer, and
then turn it on using any pad.If the code r eappear s,
call for ser vice,see below.
Restar t the cycle pressing the Cy cl e S el ector dial.
If the code r eappear s, call for ser vice,see below.
See Tro ubleshooting “The washer does not dr ain
and/or spin”, page 13. If problem continues, call for
ser vice,see below.
Make sur e the water faucets are open all the way.
Check for kinked hoses.
Check inlet screens on fill hoses.
Call for service, see below.
Restar t the cycle by pressing the Cy cl e S el ector
dial.
Code
Sy mbol M eaning Sol ut io n