Dispenser Lock
(select models)
The
Dispenser Lock
prevents ice or water from
being dispensed.
To Lock Dispenser:
• Press and hold the
Lock
button for three seconds. A
green indicator light above button will illuminate
when the dispenser is locked.
To Unlock Dispenser:
• Hold the
Lock
button for three seconds. The green
indicator light above button will go out.
Water Filter Status Indicator
Light
(select models)
The
Water Filter Status Indicator Light
serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the
Lock
and
Water
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
19
Ice and Water
Auto Light
(select models)
The
Auto Light
function activates the
dispenser light at half-power when the Light
Sensor detects that the light levels in room are low.
To Activate Auto Light:
• Press
Auto Light
button. A green indicator light
above button illuminates when the sensor is active.
To Deactivate Auto Light:
• Press
Auto Light
button. The green indicator light
will go out.
Note
• The dispenser light will operate when Auto Light is
ON or OFF.
Sabbath Mode
(select models)
When activated, the
Sabbath Mode
deactivates the
control lights while leaving the control operational.
To Activate Sabbath Mode:
• Press and hold the
Lock
and
Auto Light
buttons simultaneously for three to four
seconds. After three to four seconds, the
dispenser lights will turn off.
To Deactivate Sabbath Mode:
• Press and hold both the
Lock
and
Auto Light
buttons simultaneously for three to four seconds.
After three to four seconds, the dispenser lights will
activate.
Notes
• Dispenser light will not activate during dispensing
while in this mode.
• If the power fails, the control will remain in
Sabbath Mode when power returns.
FrontFill™ Button
(select models)
The
FrontFill™ Button
works independently of the
dispenser controls, providing an up-front alternative to
the dispenser pad for dispensing water. This feature is
convenient for filling large items that will not fit into
the dispenser area (i.e. sport bottles, pitchers, large
pans, coffee pots).
This feature allows added convenience of dispensing
ice and water simultaneously. To use, choose your
preferred ice mode from dispenser control panel. Press
container against dispenser pad while pressing the
Front Fill Button.
Light
(select models)
Press the
Light
pad once to select the Auto
Light function which activates the dispenser
light at half-power when the light sensor detects that
the light levels in room are low. The Auto indicator
light will illuminate.
To Activate Light:
• Press the
Light
pad again to turn the dispenser light
on continuously. The On indicator light will
illuminate.
To Deactivate Light:
• Press the
Light
pad again to turn the dispenser light
off.
