15
1.
Check the electrical requirements. Be sure that you have
the correct electrical supply and the recommended earthing
method. See “Electrical Requirements.”
2.
Check that all parts are now installed. If there is an extra part,
go back through the steps.
3.
Check that you have all of your tools.
4.
Dispose of/recycle all packaging materials.
5.
Connect power.
COMPLETE INSTALLATION
6.
Check dryer operation. Using a full heat cycle, let the dryer
run for at least five minutes. Dryer will stop when time is
used up.
NOTE:
Dryer door must be closed for dryer to operate.
When door is open, dryer stops, but timer continues to run.
To restart dryer, close door and press cycle button.
Summary of Contents for MLE27PD
Page 90: ...90 NOTAS ...
Page 91: ...91 NOTAS ...
