Ice Production
Ice Quality
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
PROBLEM
RECOMMENDED SOLUTIONS
Ice Maker Runs But Produces
No Ice
Check that the control is turned on.
Make sure the water supply is properly connected and turned on.
If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice. Tighten
the drain cap.
Clean the drain tube.
Check that there are no kinks in the drain line.
Ice Maker Runs But Produces
Very Little Ice
If the accelerated ice production feature is turned on, this feature increases the ice production rate to provide
you with more ice in the same amount of time.
Room temperatures of more than 90ºF (32ºC) will normally reduce ice production.
Dirt or lint may be blocking the airflow through the condenser.
If there is white scale buildup in the ice maker’s water or freezing system, you should clean the ice maker.
If the drain cap is loose, water will empty from the water pan, and you will have either thin ice or no ice. Tighten
the drain cap.
Ensure that the cutter grid is securely in place and that its harness plug is connected.
Check that water filter is properly installed.
PROBLEM
RECOMMENDED SOLUTIONS
Off Taste, Odor or Gray Color
in the Ice
If there is unusually high mineral content in the water supply, the water may need to be treated.
If there is mineral scale buildup, clean your ice maker.
Do not store any foods in the ice bin.
Make sure that all packaging materials were removed at the time of installation.
Thin, Soft or Clumps of Ice
If there is unusually high mineral content in the water supply, the water may need to be treated.
If there is mineral scale buildup, clean your ice maker.
If there are clumps of ice in the bin and if ice is not used regularly, it will melt and form clumps. Break the clumps
with the ice scoop provided.
