6
Oven Temperature Offset Control
IMPORTANT:
Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Most thermometers are slow to
react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1.
Press
OPTIONS
until
"TEMP
CALIB"
is
displayed.
2.
The
current
setting
will
be
displayed.
Press
the
"1"
keypad
to
toggle
between
the
oven
and
the
warming
drawer.
3.
Press
START
to
select
the
choice
displayed
in
Step
2.
Wait
10
seconds
for
the
display
to
change,
or
press
START,
and
then
continue
with
Step
4.
4.
Press
the
"3"
keypad
to
increase
the
temperature
in
5°F
(3°C)
increments,
or
press
the
"6"
keypad
to
decrease
the
temperature
in
5°F
(3°C)
increments.
The
range
is
from
-30°F
to
+30°F
(-18°C
to
+18°C).
5.
Press
OFF
to
save
the
setting
and
display
the
time
of
day.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit but can be changed to
Celsius.
To change:
1.
Press SETTINGS until “TEMP UNIT” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones. Reminder tones are still active when all tones are disabled.
1.
Press SETTINGS until “ALL SOUNDS” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
End-of-Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1.
Press SETTINGS until “CYCLE TONE END” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end-of-cycle tones.
1.
Press SETTINGS until “REMINDER TONE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
1.
Press SETTINGS until “KEY PRESS TONE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Tone Pitch
Sets the pitch of the tone to either high or low.
1.
Press SETTINGS until “TONE PITCH” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Demo Mode
IMPORTANT:
This feature is intended for use on the sales floor
with 120 V power connection and permits the control features to
be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
1.
Press SETTINGS until “DEMO MODE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1.
Press SETTINGS until “12-HR SHUT-OFF” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
12/24 Hour Clock
1.
Press SETTINGS until “12/24 HR” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Languages: Scrolling Display Text
Language options are English, Spanish, and French.
1.
Press SETTINGS until “LANGUAGE” is displayed.
2.
Press START to display the current setting.
3.
Press the “3” keypad to adjust the setting.
4.
Press START to save the setting.
5.
Press CANCEL to exit.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate.
All other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not
turn on or off and the heating elements will not turn on or off
immediately.
To Enable Sabbath Mode Capability (One Time Only):
1.
Open oven door.
2.
Press 7-8-9-6.
“SABBATH ON” or “SABBATH OFF” and “PRESS START TO
ENTER” will appear in the display.
3.
Press START to change the displayed status.
4.
Close oven door. Sabbath mode can be used for baking.
NOTE:
To disable the Sabbath Mode, repeat steps 1 - 3 to
change the status from “SABBATH ON” to “SABBATH OFF.”