Use
19
The recommended set points should be correct for normal
household use. The controls are set correctly when milk or
juice is as cold as you like and when ice cream is firm.
NOTE:
Areas such as a garage or porch, may experience
hotter or colder temperatures and higher humidity than inside
the home. You may need to adjust the temperature away from
the recommended set points to accommodate for these
conditions.
Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
View Temperature Set Points
1.
Press and hold TEMP for 3 seconds to activate Temperature
mode.
2.
When Temperature mode is activated, press TEMP to toggle
between Fridge and Freezer. The display will show the
temperature set point of the selected compartment, as
shown.
NOTE:
To view temperatures in degrees Celsius, press
OPTIONS. To return the display setting to degrees
Fahrenheit, press OPTIONS again.
Recommended Refrigerator Temperature
Recommended Freezer Temperature
Adjust Temperature Set Points
Refrigerator set point range: 33°F to 45°F (0°C to 7°C).
Freezer set point range: -5°F to 5°F (-21°C to -15°C).
1.
Press and hold TEMP for 3 seconds to activate Temperature
mode.
2.
When Temperature mode is activated, press TEMP to select
the Refrigerator zone. The display will show the temperature
set point of the selected compartment, as shown.
3.
Press the ADJUST up arrow to raise the temperature set
point or press the ADJUST down arrow to lower the
temperature set point.
4.
When you have finished adjusting the refrigerator set point,
press TEMP to change the display to show the freezer set
point. When the zone has been changed, “freezer” appears
on the display screen.
5.
Press the ADJUST up arrow to raise the temperature set
point or press the ADJUST down arrow to lower the
temperature set point.
6.
Press LIGHT to save and confirm the new set points, and to
return to the home screen.
NOTE:
To exit Temp mode without saving changes, allow about
60 seconds of inactivity. The temperature mode will turn off
automatically and return to the normal screen.
When adjusting temperature set points,
use the following chart as a guide:
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is
turned off. When cooling is off, “cooling off” will light up on the
display screen.
To turn cooling Off and On:
Style 1
- Press and hold OPTIONS and WATER FILTER, at the
same time, for 3 seconds, as shown.
Style 2
- Press and hold FAST ICE and WATER FILTER, at the
same time, for 3 seconds.
IMPORTANT:
To avoid unintentionally changing other settings,
press both buttons at exactly the same time.
CONDITION:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm
REFRIGERATOR Setting
1° lower
FREEZER too cold
FREEZER Setting
1° higher
FREEZER too warm /
too little ice
FREEZER Setting
1° lower
Summary of Contents for MFT2778EEZ01
Page 37: ...Notes 37...
