Maytag MDC4650AW Series Service Manual Download Page 7 | Manualshive

Page: 7 / 54

background image

General Information

©2006 Maytag Services

16026945

7

Model Identification

Complete registration card and promptly return. If
registration card is missing:

• For Amana product call 1-800-843-0304 or visit the

Web Site at www.amana.com

• For Maytag product call 1-800-688-9900 or visit the

Web Site at www.maytag.com

• For Jenn-Air product call 1-800-536-6247 or visit the

Web Site at www.jennair.com

• For Hoover product call 1-800-944-9200 or visit the

Web Site at www.hoover.com

• For product in Canada call 1-866-587-2002 or visit the

Web Sites at www.amana.com or www.maytag.com or
www.jennair.com

When contacting Maytag service, provide product
information located on rating plate. Record the following:

Model Number:

___________________

Manufacturing Number:

___________________

Serial or S/N Number:

___________________

Date of purchase:

___________________

Dealer’s name and address:

___________________

Serial Label is located inside

the upper left side of the

door opening.

Service

Keep a copy of sales receipt for future reference or in
case warranty service is required. To locate an authorized
servicer:

• For Amana product call 1-800-628-5782 or visit the

Web Site at www.amana.com

• For Maytag/Jenn-Air product call 1-800-462-9824 or

visit the Web Site at www.maytag.com or
www.jennair.com

• For Hoover product call 1-800-944-9200 or visit the

Web Site at www.hoover.com

• For product in Canada call 1-866-587-2002 or visit the

Web Sites at www.amana.com or www.maytag.com or
www.jennair.com

Warranty service must be performed by an authorized
servicer. We also recommend contacting an authorized
servicer, if service is required after warranty expires.

Parts and Accessories

To order parts and accessories for your product:

• For Amana product call 1-877-232-6771 or visit the

Web Site at www.amana.com

• For Maytag/Jenn-Air product call 1-800-462-9824 or

visit the Web Site at www.maytag.com or
www.jennair.com

• For product in Canada call 1-866-587-2002 or visit the

Web Sites at www.amana.com or www.maytag.com or
www.jennair.com

Extended Service Plan

We offer long-term service protection for this new
appliance.

• Asure™ Extended Service Plan is specially designed

to supplement Amana’s strong warranty. This plan
covers parts, labor, and travel charges.
Call 1-866-232-6244 for information.

• Dependability Plus

SM

Extended Service Plan is

specially designed to supplement Maytag’s and
Jenn-Air’s strong warranty. This plan covers parts,
labor, and travel charges.
Call 1-800-925-2020 for information.

«
...
5
6
7
8
9
...
»

Summary of Contents for MDC4650AW Series























































Reviews:

No comments

Related manuals for MDC4650AW Series

Brand: JEROS Pages: 50

Brand: Modular Pages: 97

EPIC Z MHWZ400TB02

Brand: Maytag Pages: 60

Brand: Maidaid Halcyon Pages: 17

Brand: Hanseatic Pages: 86

Brand: Gibson Pages: 14

Brand: Scandium Pages: 40

Brand: Magic Chef Pages: 12

Brand: Sears Pages: 9

Brand: Smeg Pages: 30

Brand: Mestra Pages: 28

Brand: Fisher & Paykel Pages: 76

Brand: DeLonghi Pages: 68

Brand: Gaggenau Pages: 72

Brand: Smeg Pages: 34

Brand: GE Pages: 48

Brand: GE Pages: 96

Brand: GE Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands