10
D
ISPENSER FEATURES
DISPENSER LIGHT
A light activates within the dispenser area
at full power when dispensing ice or
water.
Dispenser pad
The dispenser pad is located on the back
wall of the dispensing area. When the
dispenser pad is pressed, the selection
chosen on the dispenser control panel
will dispense.
NOTE:
➢
During initial use of water dispenser,
there will be a 1- to 2-minute delay
while water tank fills before water dis-
penses. Discard first 10-14 containers
of water after initially connecting
refrigerator to household water supply
and after extended periods of nonuse.
To dispense water:
➢
Choose water selection from dis-
penser control panel.
➢
Press sturdy, wide-mouthed container
against dispenser pad.
➢
Release pressure on dispenser pad to
stop water from dispensing. A small
amount of water may continue to dis-
pense and collect in dispenser tray.
Large spills should be wiped dry.
ICE DISPENSER
OPERATION
To dispense ice:
➢
Select cubed or crushed ice mode by
pushing appropriate button on
dispenser control panel. A green
indicator light above button shows
mode selection.
➢
Press container against dispenser
pad. When dispensing crushed ice,
hold container as close to chute as
possible to reduce spraying. Selection
mode may not be changed while ice
dispenser is in operation.
REMOVABLE TRAY
The removable tray at the bottom of the
dispenser area is designed to collect
small spills and may be easily removed
for cleaning and emptying purposes.
IMPORTANT:
Removable tray does not
drain. Continuous water running into tray
will cause tray to overflow.
WATER DISPENSER
OPERATION
To avoid personal injury or property
damage, observe the following:
➢
DO NOT
put fingers, hands or any
foreign object into dispenser opening.
➢
DO NOT
use sharp objects to
break ice.
➢
DO NOT
dispense ice directly into
thin glass, fine china or delicate
crystal.
CAUTION
