Using the Controls
5
Select Cycle and Water
Temperature
To select a cycle and water temperature, push the
control dial
in
(off position) and turn it to the
right
(clockwise) until the pointer is at the number of
minutes and water temperature needed for the wash
load in the Regular, Wrinkle Control or Delicates
cycles. All rinses use cold water.
Regular Cycle
Used to wash cottons and heavily soiled items.
Wrinkle Control Cycle
Used to minimize wrinkles with a cool-down spray
rinse following the wash.
Delicates Cycle
Used for items requiring delicate wash action. The
washer will fill, then agitate and soak alternately.
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to
reset
and then back
to the desired setting.
STEP
1
STEP
2
WATER LEVEL SETTING
LOAD SIZE
Small
1/4 Full
Medium
1/4 – 1/2
Large
1/2 – 3/4
Super
3/4 – Full
Note:
Items must circulate freely for best results.
Note:
In wash water temperatures below 60
°
F
(16° C), detergents
do not
dissolve well or clean
well. Care labels define cold water as up to 85
°
F
(29° C).
