3
Installing side-mounted
handles
If installing handles for the first time, the
fresh food and freezer handles can be
located on the back of the refrigerator.
➢
Using a T-15 Torx
®
* screw driver,
remove screws from the side of the
fresh food door or top of the freezer
door or drawer.
➢
Align handle screw holes with door
holes and install handles with screws
that came in these screw holes.
Removing side-mounted
handles
Removing handles may be necessary
when transporting the refrigerator
through tight spaces, or when reversing
the door.
➢
Using a T-15 Torx
®
* screw driver,
remove handle by removing three
screws from side of fresh food door or
top of freezer door or drawer.
➢
Retain screws for later replacement.
I
NSTALLATION
,
CONT
.
How to remove the
doors and hinges
Some installations require complete door
removal to get refrigerator to its final loca-
tion.
WARNING – To avoid electrical shock
which can cause severe personal injury
or death, disconnect power to refrigera-
tor before removing doors. Connect
power only after replacing doors.
WARNING
CAUTION – To avoid damage to walls
and flooring, protect soft vinyl or other
flooring with cardboard, rugs or other
protective material.
CAUTION
➢
Unplug power cord from power
source.
➢
Remove top hinge cover from refriger-
ator door by removing Phillips screw.
• Retain screw and cover for replace-
ment.
➢
Unscrew 5/16" hex head screws from
top hinge to remove hinge.
• Retain all screws for later use.
➢
Lift refrigerator door from center hinge
pin.
➢
Hold freezer door in place while
removing center hinge pin with a 5/16"
hex nut driver. Remove freezer door.
• Retain hinge pin for later use.
*Torx
®
is a registered trademark of Textron, Inc.
*Torx
®
is a registered trademark of Textron, Inc.
