Maytag 8TMHW6630HW Use & Care Manual Download Page 16

40

WASHER CARE (cont.)

WASHER CARE (cont.)

Begin Procedure
1.     Clean Washer with affresh Cycle Procedure 

(Recommended for Best Performance):

 

a.

   Open the washer door and remove any clothing  

or items.

 

b.

   Use an affresh Machine Cleaning Wipe or a soft, damp 

cloth or sponge to clean the inside door glass. 

 

c.

   Add an affresh Washer Cleaner tablet to the  

washer drum.

 

d.

   Do  not add the affresh Washer Cleaner tablet  

to the dispenser drawer.

 

e.

   Do  not add any detergent or other chemical to the 

washer when following this procedure.

 

f.

   Close the washer door.

 g. 

Select the Clean Washer with affresh cycle.

 h.

  

On some models: 

Select the Fresh Hold/Fresh Spin 

option to help dry the washer interior after the cycle is 

complete.  

NOTE: 

The washer remembers your last option 

selection and will use it for future wash cycles until  

you deselect that option. While the fan is ON, the  

washer door will lock. To unlock the door, touch 

POWER. 

 i.

   Touch and hold START to begin the cycle. The  

Clean Washer with affresh Cycle Operation is described 

below.

2.  Chlorine Bleach Procedure:

 

a.

   Open the washer door and remove any clothing  

or items.

 

b.

   Open the dispenser drawer and add regular liquid  

chlorine bleach to the MAX level in both the bleach 

compartment and the fabric softener compartment. 

Either traditional or HE chlorine bleach can be used.

  

IMPORTANT: 

Do not use thickened, easy-pour,  

or no-splash bleach as excess suds may occur.

 

NOTE:

 Use of more liquid chlorine bleach than is  

  recommended above could cause washer damage  

  over time.
 

c.

  Close the washer door and the dispenser drawer.

 

d.

   Do not add any detergent or other chemicals to the 

washer when following this procedure.

 e. 

Select the Clean Washer with affresh cycle.

 f.

  

On some models:

 Select the Fresh Hold/Fresh Spin 

option to help dry the washer interior after the cycle is 

complete.  

NOTE: 

The washer remembers your last option 

selection and will use it for future wash cycles until  

you deselect that option. While the fan is ON, the  

washer door will lock. To unlock the door, touch 

POWER. 

 g.

   Touch and hold START to begin the cycle. The  

Clean Washer with affresh Cycle Operation is described 

below.

 

NOTE: 

For best results, do not interrupt cycle.

CLEAN WASHER CYCLE REMINDER

NOTE: 

Not all models have the Clean Washer with affresh 

cycle reminder light.
The Clean Washer with affresh LED  

will flash at the end of a wash cycle 

when the washer has run 30 wash 

cycles. This is a reminder to run the 

Clean Washer with affresh cycle. 
If the Clean Washer with affresh cycle is not turned on, the 

LED will stop flashing at the end of a wash cycle after running 

3 more regular wash cycles. After 30 more wash cycles are 

completed, the Clean Washer with affresh LED will again 

flash at the end of a wash cycle as a reminder.

Description of Clean Washer with affresh Cycle Operation:
1.

   The Clean Washer with affresh cycle will determine whether 

clothing or other items are in the washer.

2.

   If no items are detected in the washer, it will proceed  

with the cycle.

 

a.

   If any items are detected in the washer, “rL”  

(remove load) will be displayed. The door will unlock. 

Open washer and remove any garments from the  

washer drum.

 

b.

  Touch POWER to clear the “rL” code.

 

c.

  Touch and hold START to restart the cycle.

3.

  

Steam models only:

 During the first 20 minutes of the 

cycle, it will activate the steamer but the drum will not spin 

or fill with water. You may see condensation on the door 

glass during this initial phase. If you are using an affresh 

Washer Cleaner tablet, it will not dissolve completely during 

the steam phase. This is normal.

After the cycle is complete, leave the door open slightly to 

allow for better ventilation and drying of the washer interior.

Cleaning the Dispensers

After a period of using your washer, you may find some 

residue buildup in the washer’s dispensers. To remove residue 

from the dispensers, remove the drawer and wipe  

the surfaces with an affresh Machine Cleaning Wipe or a 

damp cloth and towel dry either before or after you run the 

Clean Washer with affresh cycle. Use an all-purpose surface 

cleaner, if needed.

IMPORTANT: 

Dispenser is not dishwasher safe.

Cleaning the Outside of the Washer

Use an affresh Machine Cleaning Wipe or a soft, damp cloth 

or sponge to wipe up any spills. Occasionally wipe the outside 

of your washer to help keep it looking new. Use an affresh 

Machine Cleaning Wipe or mild soap and water.

IMPORTANT: 

To avoid damaging the washer’s finish,  

do not use abrasive products.

Summary of Contents for 8TMHW6630HW





























Reviews: