450365 - 1
Maytag Co.
3
Important Information ...................................... 4
A. Safety Precautions ............................................ 4
Routine Maintenance ....................................... 6
A. Cleaning ............................................................ 6
B. Adjustments ...................................................... 7
Installation Requirements ................................ 8
A. Enclosure, Air Supply, and Exhaust
Requirements .................................................... 8
B. Electrical and Gas Requirements ...................... 8
C. Operational Service Check Procedure .............. 9
Description of Parts ....................................... 10
A. Control Panel (Microprocessor) ...................... 10
B. Globar .............................................................. 10
C. Gas Burner Assembly ...................................... 10
D. Drive Motor ....................................................... 11
E. Motorized Impellor (Blower Motor) ................... 11
F. Tumbler ............................................................ 11
G. Main Door Switch ............................................ 12
H. Sail Switch (Gas Models Only) ........................ 12
I. Hi-Limit (Gas Models Only) ............................. 12
J. Automatic Reset Thermostat ........................... 12
K. Lint Drawer ...................................................... 12
L. Lint Drawer Switch .......................................... 13
M. Reversing Relay Location ............................... 13
Servicing .......................................................... 14
Introduction .......................................................... 14
A. Computer Controls .......................................... 14
B. Glo-Bar Controls .............................................. 16
C. Thermostats .................................................... 19
D. Sail Switch Assembly (Gas Models Only) ........ 19
E. Front Panel and Main Door Assemblies .......... 20
F. To Replace Lint Drawer Switch ....................... 25
Faults ............................................................... 30
Events .............................................................. 31
Technical Information .................................... 32
A. Data Label ....................................................... 32
B. Using A Manometer ......................................... 33
C. Tool List ........................................................... 33
Ta ble of Contents _______________
List of Acronyms ______________________
L.P.
Liquid Propane
OSHA
Occupational Safety and Health Administration
T.E.F.C.
Totally Enclosed, Fan-Cooled
IMPORTANT
You must disconnect and lockout the electric
supply and the gas supply or the steam supply
before any covers or guards are removed from
the machine to allow access for cleaning,
adjusting, installation, or testing of any
equipment per OSHA standards.
Please observe all safety precautions displayed
on the equipment and specified in the
installation manual included with the dryer.
FOR YOUR SAFETY
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
Do not dry mop heads in the dryer.
Do not use dryer in the presence of dry cleaning
fumes.
CAUTION
Dryers should never be left unattended while
in operation.
“Caution: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper operation.”
«Attention: Au moment de l’entretien des
commandes, étiquetez tous les fils avant de les
débrancher. Des erreurs de câblage peuvent
entraîner un fonctionnement inadéquat et
dangereux.»
WARNING
Children should not be allowed to play on or
near the dryers.
Children should be supervised if near dryer(s)
in operation.
The dryer must never be operated with any of
the back guards, outer tops, or service panels
removed. Personal injury or fire could result.
The dryer must never be operated without the
lint filter or screen in place, even if an external
lint collection system is used.
The wiring diagram for the dryer is located in
the front electrical control box area.
