4 |
P a g e
5 PANEL SINGLE POINT INFLATABLE
WINDBREAK (MP9539) USER GUIDE
It is recommended each peg is driven fully into the ground at an angle of 45 Degrees
away from the pegging point. Tension each guy rope using the guy adjusters (FIG 5).
FIG 5
Adjust the windbreak to the desired shape and position ensuring all air beams remain
vertical. Peg down the middle eyelets found at the base of each panel.
The windows can be covered by attaching the panels with the elasticated toggles (FIG
6).
FIG 6
To deflate the air beams unscrew the bottom cap on both valves and the air will be
released.
WARNING
– Be aware of sudden loud noise caused by air escaping
when deflating.
