3 |
P a g e
5 PANEL SINGLE POINT INFLATABLE
WINDBREAK (MP9539) USER GUIDE
There are 2 valves on the windbreak. Locate the first valve and unscrew the top cap.
Locate the second valve and make sure both the top & bottom caps are fully tightened.
Connect the large adaptor (FIG 1) to the hand pump. Insert the adaptor into the top cap
on the valve (FIG 2). Inflate the air beam to approx. 5-6 PSI. Remove the adaptor from
the valve and securely tighten the top cap.
FIG 1
FIG 2
Starting from one end; peg down the bungee eyelet at the base of the air beam (FIG 3).
Use 2 guy ropes to hold each panel in place
– ensuring the air beams are vertical (FIG
4).
FIG 3
FIG 4
Repeat this process for each section of the windbreak.
