3
INSTALLATION
These instructions do not apply to all vehicles. They are only meant as a general guide due to the number of different makes &
models. For vehicle specific questions contact your vehicle’s manufacturer.
Camera installation
There are several ways to mount the camera on the back of your car. But the most convenient is to mount it near the number
plate. Supplied within the kit are two mounting plates; one is intended to be fixed behind the number plate, and the other is for
surface mounted installation. Once the camera is affixed to either mounting plate the camera can be adjusted manually on its
vertical axis.
Ensure that the cameras field of vision is not obstructed.
Bracket for licence plate mounting
A1.
Remove the rear number plate; the plate may be affixed either directly to the vehicle or via a mounting bracket.
Dependant on the vehicle, screws/bolts or sticky pads may be used.
A2.
If your vehicle utilizes a mounting bracket, position the camera mounting bracket (together with camera) behind the
number plate bracket if possible. Secure number plate bracket and mounting plates back to the vehicle with the original bracket
fixings.
A3.
The number plate can then be remounted onto the bracket. If your vehicle is not supplied with a number plate mounting
bracket the camera can be mounted directly onto the number plate.
NOTE: ENSURE THAT THE CAMERA OR BRACKET DOES NOT OBSCURE ANY PART OF THE VEHICLE NUMBER PLATE!