Mayer MD900 Instruction Manual Download Page 9 | Manualshive

Page: 9 / 65

background image

MD900

8

General safety instructions

Suitable installation site

•

Operate the MD900 only in closed rooms and avoid
humidity and dust.

•

Ensure unobstructed air supply to all sides of the device.
Do not place the device in the immediate vicinity of heat
sources.

•

Do not expose the device to direct sunlight or strong
vibrations.

Power supply connection

Only use the power supply unit included in the MD900
packages. Refer to the separate instructions for the power
supply (included in the power supply packaging). This power
supply is designed to power the MD900 and the devices
connected to the USB 2.0 host (maximum 1.5A in total).

The scope of delivery also includes country adapters for:

US / EU / UK / AU

Operation

•

Do not place any liquids on the MD900 (such as drinks or
similar)

•

Make sure that the device is stable during operation.

•

The MD900 must not be exposed to direct sunlight.

•

No heat sources in the immediate vicinity.

Care

Do not open the MD900. Repair and maintenance may only be
performed by qualified personnel. In addition, opening the
device will void your warranty.

Only use a dry, soft cloth or brush to clean the device housing.
Do not use solvents or similar chemicals, they may damage the
surface.

.

Please read the following safety instructions
carefully! They contain some basic rules for
handling electrical devices. Please read all
instructions before you put the device into
operation.

«
...
7
8
9
10
11
...
»

Summary of Contents for MD900


































































Reviews:

No comments

Related manuals for MD900

Brand: Satel Pages: 4

Brand: Yamaha Pages: 69

Brand: TB-Electronics Pages: 30

Brand: Dave Smith Instruments Pages: 96

Brand: Arturia Pages: 49

Brand: Arturia Pages: 69

Brand: Arturia Pages: 85

Brand: Yamaha Pages: 29

Soundhack tELHARMONIC

Brand: Make Noise Pages: 21

Brand: Epoch Modular Pages: 3

Brand: ARP Instruments Pages: 50

Brand: Weston Precision Audio Pages: 7

Brand: Weston Precision Audio Pages: 12

Brand: neutral labs Pages: 9

Brand: neutral labs Pages: 11

Brand: Modal Electronics Pages: 41

Brand: Modal Electronics Pages: 41

Brand: Modal Electronics Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands