MD900
50
•
Dual PWM
Symmetrical 2-fold pulse wave, changes the width from
the center SHAPE (0-256).
•
HSync SAW
2-fold sawtooth wave, SHAPE multiplies period SHAPE (0-
256) relative to oscillator fundamental frequency.
•
PWM
Classic pulse width change 50-95% SHAPE (0-256)
•
Formant SIN
Formant sine: SHAPE (0.256) changes the carrier signal
period, P2 (0-100%) changes the modulation period
relative to the oscillator fundamental frequency
•
PD SIN
Phase Distortion (PD): Exponential distortion of the phase
of a sine wave, SHAPE (0-256) defines the degree of
distortion.
•
Fract PWM
Fractal pulse width change, proportionally multiplies the
PULSE only in the positive pulse duration, a special type of
pulse width change.
PANEL
The panel operation of the oscillator is identical to the value
labels in terms of parameters and it can be set alternately on
the main display or on the panel.
Switching the oscillator mode is done by long pressing the
SEL/MODE endless control.
Long pressing of the UNISON key switches between
mute/unmute, i.e. the oscillator is muted.
The octave LED indicates when the coarse pitch is on an octave.
The endless knob SEL allows the selection of a wavetable. When
the knob is turned, the name of the wavetable starts blinking in
the assistance display to indicate the selection process. If this
selection is not confirmed within 4 seconds, the name jumps
back to the currently loaded wavetable. However, if the
Figure 33. [OSCILLATOR-PANEL]