21
3. How to operate
3.1 How to adjust
By adjusting the PROXIMITY SWITCH B1, the unloading
position has to be adjusted to the various heights of subsequent
machines.
The laser sensor has to be set for the metering of the filling
height for the following machine (e.g. TM 1010).
To do so:
•
Move into unloading position.
•
Stop machine.
Sensor calibration
(to push the sensor, use a ball point pen)
Mayer factory settings:
•
Activation of the underground shelter engine with a
distance of 850 mm under the tester (display)
•
Shutdown of the underground shelter engine with a
distance of 600 mm under the tester (display)
To change settings:
•
Press the Mode/Enter button consecutively until SP1
appears
•
Press the Set button: The value of 850 mm appears. Now
you may change the value while keeping the Set button
pressed and held down.
Caution!
Only incremental change is possible
Summary of Contents for 6160 Big Bale Breaker
Page 10: ...9 ...
Page 20: ...19 2 3 Control lever 1 Unloading direction 0 Standby position 2 Loading direction Main switch ...
Page 21: ...20 ...
Page 33: ...32 10 Part list ...
