background image

283

Front Telephone – Rear Cabin

Telephone operation

Example: Unlock code 2307

Open the keypad cover on the re-
mote control and press keys 

, and



.

In case of erroneous entry, delete the 
last or more digits:

Select item 

Delete

 using the selec-

tion wheel on the remote control 
and press the selection wheel to 
confirm.

After entering all digits, select item 

OK

 using the selection wheel on the 

remote control and press the selec-
tion wheel to confirm. 

All telephone functions are available 
if the correct number has been en-
tered.

After registering, 

Ready

 or 

Roaming

 ap-

pears in the center of the status bar.

The unlock code has to be entered 
again if the entry was incorrect.

When COMAND is switched ON, switch-
ing to telephone mode from any other 
operation mode is made as follows:

On the remote control, press key 

Select item 

TEL

 using the selection 

wheel on the remote control and 
press the selection wheel to confirm. 

On the remote control, press key 

.

Select item

TEL

 using the selection 

wheel on the remote control and 
press the selection wheel to confirm.

The Telephone main menu appears.

Telephone status information is dis-
played at the right end of the status bar. 

Switching to telephone mode 

i

The unit automatically switches to 
telephone mode to receive an incom-
ing call.

Telephone main menu 

Summary of Contents for COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM
































































































































































































































































































































Reviews: