MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual, Page: 146 / 319

146
Navigation – Front Cabin
During route guidance
The available options appear.
Press

or

to select an option.
Press

.
The selected option is activated. A
solid circle designates an activated
option.
Standard
option:
The symbols for the system de-
fault setting are displayed on the
map.
Personal
option:
The symbols to be displayed can
be selected and set (
page 146).
None
option:
No symbols will be displayed on
the map.
Setting personal symbol display
After activating the
Personal
option,
press the
Change
soft key.
The list of available symbols appears.
Press

or

to select a list entry.
Press

.
Activate or deactivate the symbol de-
pending on its previous state. Several
symbols can be activated.
Finally, press the
Back
soft key or wait
for the screen to change.
The setting is stored.
One of the following orientations can be
selected:
2D North up
Fixed map orientation, north is al-
ways pointing up,
2D Heading up
Dynamic map orientation, driving di-
rection is always pointing up.
In the Display menu ( page 145),
press the
View
soft key.
Both options appear on the display.
i
The
Change
soft key is only available if
the
Personal
option is selected. Oth-
erwise, it will appear shaded out.
i
Empty square = symbol deactivat-
ed
Solid square = symbol activated
Any number of symbols can be acti-
vated.
Setting map orientation