MAYBACH COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM, Operator'S Manual

Page: 145 / 319

145
Navigation – Front Cabin
During route guidance
Press

to select the
Delete active stopover
entry.
Press

.
This will delete the stopover. The sys-
tem calculates the route to the final
destination,
or
Press

to select the
Replace active stopover
entry.
Press

.
The stopover is deleted, a new stop-
over destination can be entered
(
page 143).
The soft key displays are shown
(
page 139).
Press the
Display
soft key.
The Display menu appears.
Selectable soft keys:
Symbols
soft key:
Allows access to setting the symbols
display (
page 145).
View
soft key:
Allows access to setting the map ori-
entation (
page 146).
MAP
soft key:
Allows access to the Map Display
menu (
page 147).
Auto
soft key:
Allows access to the Automatic map
switching menu (
page 148).
Zoom
soft key:
Allows access to the definition of the
scales for full-screen and split-screen
map display (
page 148).
It can be selected which POIs are to ap-
pear as symbols on the map.
In the Display menu ( page 145),
press the
Symbols
soft key.
Defining route guidance displays
Setting symbol displays
i
The symbols are on display only if the
map scale is set at 0.05 mi (50 m),
0.1 mi (100 m), 0.2 mi (200 m), or
0.5 mi (500 m).
To set the map scale ( page 133).