Stand 36-1824
English
page 2 of 7
Determining the location for the foundation
1.
Allow sufficient space between sunshades or between the wall of the building and the
sunshade.
Sunshades that are located too close together wear sooner.
Sunshades may sway slightly. If there is not enough space between them, they
may touch and abrade or scrape the canopy fabric at the spoke ends.
Make sure that there is a clearance of approx. 15 - 20cm between the
sunshades (or between sunshade and the wall of the building).
2.
We would like to stress that uneven patios are no problem for us. We are able to
compensate any unevenness of the ground by adjusting the height of each individual
sunshade. Extra length upper anchor tubes are available at 10cm gradation and can be
adjusted and accommodated on location.
Dowelling the anchor plate
1.
Screw the upper anchor tube onto the dowel-anchored plate (cf. illus.). Slip the 16mm
washer on the M16x30mm socket head screw and tighten, using the enclosed 14mm hex
key.
washers
socket head screw
dowel-anchored plate
upper anchor tube
Caution
