Stand 42-1014
MAY setup aid
M10 socket head screw, 2x
8. Remove the cardboard from the upper anchor foot.
9. Tighten the two M10 screws of the upper anchor tube.
A falling parasol can cause serious or even fatal injury.
If, during assembly, the parasol spins round in the anchor tube, it may become uncontrollable,
fall and thus cause a serious accident.
• Tighten the two M10 socket head screws with a torque of 20 Nm.
Assembly: Erecting the parasol
1. Remove the foam package.
If a knife is used to remove the packaging, the protective sleeve and the canopy fabric may
get damaged.
• Do not use a knife or any other sharp instrument to remove the packaging.
• Remove the adhesive tape by pulling at the end and winding it up.
Danger
Caution
Deutsch /
English
/ Français
page 7 of 22
