Stand 42-1014
top end cap
bottom end cap
Assembly: Unpacking the parasol
1. Remove bottom end cap of the front part of the cardboard sleeve.
Pulling out the parasol from the cardboard sleeve may damage the canopy.
When the parasol is withdrawn, the metal brackets that fasten the tube caps can tear the fabric.
• Remove all metal brackets from either end of the protective tube before withdrawing the
parasol.
2. Remove the accessory package (crank, MAY protective gloves) and the printout of the operating manual
attached to the centre pole.
3. Remove the top end cap. This is not required but helpful as it avoids the development of a vacuum
within the cardboard sleeve during pulling out the parasol. This would complicate pulling out the
parasol.
4. Pull at the centre pole to pull out the parasol of the cardboard sleeve.
Pulling the parasol over rough surfaces (brinks, edges, floors) damages the fabric.
• Put the cardboard sleeve onto two tables or working platforms in order to pull out the parasol
away from the ground.
• Never pull the parasol over brinks or edges.
• Do not lean the parasol against anything.
Caution
Caution
Deutsch /
English
/ Français
page 5 of 22
